PracticeStacks
All guides
Invoices

Invoice GST and numbering

How GST, SAC codes, the client's GSTIN and invoice numbers work, and how to cancel, delete or re-issue an invoice.

Open Invoices2 min readChecked 16 Nov 2026

How GST, SAC codes, the client's GSTIN and invoice numbers work on an invoice, which firm it is issued from, and how to cancel or re-issue one.

How it works

  1. Set your defaults. In Settings › Invoicing, the Charge GST on invoices switch decides what new invoices start as (on if your firm has a GSTIN). Type your SAC code on invoices (it starts at 998313) and click Save Settings. A service can carry its own SAC code. If you do not charge GST, the SAC code is optional: clear the box and save, and your invoice lines print no SAC code. Once Charge GST on invoices is on, a SAC code of 4 to 8 digits is needed.
  2. Pick the firm. If you bill under more than one firm, Bill from sets whose name, GSTIN, number series and bank account print. A firm without a GSTIN cannot send an invoice that charges GST.
  3. Check the client's GSTIN. It prints under Billed To when saved on the client. Type it in the Client GSTIN box under the client's name: once all 15 characters are in, it saves on the client by itself and the line under the box turns green with Saved on the client. There is no button to press. Typed it wrong? Retype it in the same box and the corrected number replaces the old one. A number in the wrong format is named under the box and is not saved until it is right. A client with several GSTINs gets a Bill to GSTIN box.
  4. Set GST per line. Each line takes 0, 5, 12, 18 or 28%. Which tax splits it: CGST + SGST for a client in your state, IGST for another state, or Work it out from both GSTINs.
  5. Mark government fees. For a challan or stamp duty you paid, pick Govt fee in the line's GST picker. It prints No GST and no SAC code, and sits outside the taxable value. Fees saved on a service are added as lines by themselves.
  6. Give a discount. When you edit an invoice, type an amount in Discount. It comes off your services before GST, so the GST is worked out on what is left. Government fees take no discount. The invoice prints Less: Discount under the subtotal.

Invoice numbers

By default a number reads INV-2026-27-004: prefix, financial year, running number, and the series restarts at 001 every April. You can choose your own instead, for example INV-RKA-101 with no year, to match the numbers in Zoho or Tally. A number is taken only when the invoice goes to the client, so drafts show On send. The issue date works the same way: it reads On send until the invoice goes out, and your client's copy carries the day it was sent. Numbers are never reused, and the full number cannot pass 16 characters.

How do I set my own invoice number, like INV-RKA-101?

  1. Open Settings › Invoicing › Numbering. Each firm you bill under has its own row.
  2. In Next invoice number, type the whole number exactly as you want the next invoice to read, for example INV-RKA-101. Typing just a number, like 119, keeps your current prefix.
  3. Under Year in the number, pick Keep counting, no year for numbers like INV-RKA-101 that never restart, or Restart at 001 every April for numbers that carry the financial year. Typing a number without a year picks Keep counting for you, and typing one with this year's label picks Restart.
  4. Check the line under the box, for example Next invoice: INV-RKA-101, and click Save.

The next invoice sent from that firm carries that number, and each one after it counts up: INV-RKA-102, INV-RKA-103. The invoice PDF, the client's link and Zoho Books all show the same number. Invoices already sent keep their numbers. With a year in the number, the prefix can be up to 3 characters; without the year, up to 11. Coming from Tally mid-year? Type the number after your last Tally invoice. If you entered your old invoices, a Use … link offers the next one in the same style. The number cannot go back to one already sent from PracticeStacks in the same series.

Common questions

I already sent RKA-2026-27-118. Can I switch to INV-RKA-101 now?

Yes. A series without the year counts on its own, so it can start at 101 even after 118 went out with the year in it. Both sets of numbers stay unique, the invoices already sent keep their numbers, and the gap note does not count the switch as missing numbers.

Some of my invoices read INV-202608-013, others INV-2026-27-014.

Early invoices used an older monthly format (year and month, then the number). Every invoice sent since the change uses the financial-year format. Both belong to the same series for the year and the running number carries on across them, so 013 is followed by 014. Old numbers are not changed, because your clients already hold those invoices. On the All invoices list, and on the Billing queue in the classic layout, an old-format number has a dotted underline; point at it to see this note. On the Dashboard, a row in Needs your attention for such an invoice carries a small grey Old number format label; point at it for the same note.

Why are some numbers missing from my series?

If numbers were skipped by the older numbering, the All invoices list shows a yellow note naming them, for example Numbers 003–012 are missing from your FY 2026-27 invoice series. No invoice was ever issued with those numbers and none will be reused. Close the note with ×; a one-line reminder stays above the list, and Why? opens the full explanation again whenever you or your auditor needs it.

The same facts show under Settings › Invoicing › Numbering, below each series: for example 003–012 never issued · Up to 013 in the old monthly format. Click Why? there to read which numbers were skipped and from which number the financial-year format starts.

How do I print my Udyam (MSME) registration number on invoices?

Go to Settings › Firm › Business profile and type it in Udyam Registration No. (MSME), as it reads on your certificate (for example UDYAM-MH-01-0012345). It saves on its own and prints under your GSTIN on every invoice, including invoices already raised, the PDF and the preview in Settings › Invoicing. Clear the box to stop printing it. A separate company you bill as has its own box under Your firms and prints only its own number; an office of your firm prints your firm's.

My firm has no GST. Do I need a SAC code?

No. While Charge GST on invoices is off, open Settings › Invoicing, clear the SAC code on invoices box and click Save Settings. New invoices then print no SAC code, unless a service carries its own. Invoices already sent keep the code they went out with. If you later turn GST on, type a SAC code of 4 to 8 digits before saving.

Can my invoice look more formal, like a ruled black and white bill?

Yes. Open Settings › Invoicing, go to Invoice layout, pick Formal and click Save Settings. Every invoice and PDF then prints in a ruled black and white box that fills the page, with your logo and signature larger, the total in words, and your PAN below the box. A GST invoice to a client with a GSTIN also prints Place of Supply. The details on the invoice stay the same. Modern, with cards in your brand colour, is the default, so nothing changes unless you choose. The choice covers all your firms and invoices already sent. Switch back the same way at any time.

How do I make my logo bigger or smaller on the invoice?

Open Settings › Invoicing, go to Invoice layout, pick Small, Medium or Large under Logo size and click Save Settings. Your logo is fitted inside that size on every invoice and PDF, in either layout, and keeps its shape. Medium is the default. The choice covers all your firms and invoices already sent.

Will my invoice PDF fit on one page?

Yes, when it only just runs over. If long Terms & Conditions or a large logo would push the signature onto a second page, the PDF is printed slightly smaller so the whole invoice fits on one page. You do not need to do anything. An invoice with many lines that needs three or more pages prints at full size across its pages.

Why does my invoice say Net 4 days when my payment terms are 15?

Payment Terms on an invoice counts the days from that invoice's issue date to its due date, so it always agrees with the dates printed beside it. A draft has no issue date yet, so it prints no terms. To give a client longer, change the invoice's due date.

How do I cancel an invoice?

Only the owner and administrators can. Click Cancel, type the reason (the client reads it if the invoice was sent) and confirm. Nothing is deleted and the number stays spent. An invoice with a payment against it cannot be cancelled: use Remove payment in the ⋯ menu first.

How do I delete an invoice I never sent?

Only the owner and administrators can. An invoice that still reads On send (no number yet), was never sent and has no payment can be deleted outright. Open it: a cancelled one shows a red Delete button at the top; on a draft, choose Delete invoice from the ⋯ menu. Add a reason if you like and confirm. Any finished work on it goes back to the bill-later list. An invoice that took a number or went to the client cannot be deleted, only cancelled, so your number series has no gaps.

The invoice carries billables, such as a govt fee or stamp duty I paid. What happens to them?

A billable is money you paid for the client — a govt fee, stamp duty, courier — billed back at cost. When the invoice you are deleting carries any, the delete box lists them and asks What happens to them:

  • Keep them owed by the client (already picked): they go back to the client's Invoices tab as owed, and on the task each one reads Its invoice was deleted — still owed, with Add to invoice beside it.
  • Remove them too: they are deleted, as if never recorded. A govt fee typed on New Task is cleared from its task.

The same question appears when you take such a line off in Edit invoice, under the lines, before you save. A staff expense claim, a bill in your expenses, or a billable whose staff claim is already approved or paid always stays owed, and the box says why next to it.

I sent an invoice under the wrong firm.

Click ⋯ and choose Re-issue from another firm. A draft with the same lines opens under the right firm and the original is cancelled for you.

Why do some of my monthly bills have no GST?

Monthly bills set up in advance from a signed proposal did not carry GST at first. A contract signed before 1 October 2026 may still have such bills. If yours does, a yellow note above your invoices says how many are waiting to send.

  1. Click Review and add GST. Each client shows its bills, before and after, for example ₹60,000 → ₹70,800.
  2. Click Add GST beside a client, or Add GST to all. Each bill takes the rate the client signed for, split as CGST + SGST or IGST.
  3. If a client's price already includes GST, click Keep as they are beside that client. Those bills go out unchanged, you are not asked about them again, and Add GST to all leaves them out.

Bills already sent or paid are never changed. They are marked Sent without GST in All invoices, and the invoice shows why. Ask your accountant how to correct them, for example with a separate invoice for the GST.

Why is one service at 0% on a bill where the others are 18%?

An invoice raised from a proposal charges the rate saved on that proposal. If a service was at 0% in your service list when the proposal went out and you later set it to 18%, the bill still says 0%. When a bill waiting to send has such a line, a yellow note above your invoices says so.

  1. Click Review rates. Each bill shows the service and its rates, for example 0% → 18%, and the total before and after, for example ₹91,300 → ₹1,00,300.
  2. Click Use this rate beside a bill to change it, or the button at the bottom to change all of them. The GST and total are worked out again.
  3. If the service is exempt, or you agreed that price with the client, click Keep 0%. The note closes and the bills stay as they are.

You can also settle one bill from the client's Invoices tab. The bill's row names the service and offers a button with the new rate and total, for example Use 18% · ₹91,300 → ₹1,00,300, and Keep 0% for that bill only. Opening the bill shows your team a note too, with a link to that tab. Your client never sees the note and it does not print.

The new total is higher than what the client signed, so check with them first if needed. Bills already sent are never changed. They carry a Service at 0% GST label in All invoices and on the client's Invoices tab; if GST was due, your accountant can raise a credit note or a revised invoice. You can also set one line yourself: click the pencil on the invoice and change that line's GST.

What does "Mixed rates" mean on an invoice?

The invoice has lines at different GST rates, for example 18% and 0%. Each line carries its own rate, and the GST rows add up what each rate comes to.

Why does an invoice show the export note and no GST?

The client is set as outside India and billed under LUT, so it is billed at 0% with the export note. Pick Charge GST on one invoice to tax it anyway, or turn the LUT switch off on the client.

The client wants the invoice on their office in another state, so it needs IGST instead of CGST + SGST.

Before the invoice is sent, click the pencil, change Which tax and save. After it is sent, and even after it is paid, the owner and administrators can still change who it is billed to:

  1. Open the invoice, click ⋯ and choose Edit amounts / Billed To (or Edit Billed To / tax on a paid invoice).
  2. Set Which tax to IGST (or back to CGST + SGST).
  3. Type the new address in Billed To address. It prints on this invoice only; the client's own address and their other invoices stay as they are. Leave it blank to print the client's usual address.
  4. If the client has a GSTIN in that state saved on their record, pick it in Bill to GSTIN.
  5. Click Save changes, then Send revised invoice to send the client the new copy, or Not now.

The total does not change, only how the GST is split. The invoice keeps its number and date and shows Revised on with the date. On a paid invoice the lines and discount stay locked. If the invoice is already in a filed GSTR-1, amend it there too.

More: Invoices · Online payments

More guides

Every other part of the product, the same way.

See all